Highlights

High-speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, and continuous network testing. It is frost-resistant, temperature conditions of work from -30 Degree C to +50 Degree C, and compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hung on the wall with a fastener (supplied with each stabilizer).

• Short circuit protection 
• Overload protection (overheating) 
• Undervoltage protection 
• Overvoltage protection 
• Protection against impulse (lightning) discharges
• Effective smoothing of impulse noise in the network

Product Details

• kind of voltage comes out of the stabilizer. When the input voltage is less than 120 volts, the letter "L" lights up on the display, but for some time there is still voltage at the output of the stabilizer.
• So the stabilizer will work even from 70 volts , but we must understand that its load level should then be less than the nominal. The stabilizer begins to perform its full characteristics from 120 volts. At a voltage in the range of 270-285 Volts, the actual output voltage will also be shown on the display. But when reaching 285-288 Volt, the stabilizer will immediately turn off by turning off all devices (the letter “H” on the display). The output voltage will be high and dangerous for the equipment.
• The electronic unit of the voltage stabilizer SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows for switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input.
• SUNTEK voltage regulator will be your network status indicator from 70 to 285 volts . If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything himself and give the best option for this situation.